Chairpersons: Larry Butkus (United States Air Force), Marv Nuss (Federal Aviation Administration)

8:00 AM - 8:30 AM Full-Scale Extended Fatigue Testing of Fuselage Structure From a Retired Passenger-Service Aircraft
Bao R. Mosinyi, Federal Aviation Administration-Drexel Fellowship Student; J. Bakuckas, R. Pappas, C. Bigelow, Federal Aviation Administration Advisors; J. Awerbuch, A. Lau, T.M. Tan, Drexel Advisors; D. Steadman; Delta Air Lines
Paper Slides

8:30 AM - 9:00 AM IAF Aging Aircraft and Zukit Tear Down Inspection
Lt. Col Sasson Bar Moshe, Lt. Col Boaz Englender, Lt. Col Arie Atzmoni, Lt. Col Halevi Rotem, Maj. Yossi Yoresh, Lt. Guy Shahar, Israeli Air Force
Paper Slides

9:00 AM - 9:30 AM Destructive Evaluation of Aging General Aviation Airplanes
Dale Cope and Melinda Laubach, National Institute for Aviation Research; Michael Shiao, Federal Aviation Administration William J. Hughes Technical Center; Marvin Nuss, Federal Aviation Administration Small Airplane Directorate
Paper Slides

9:30 AM - 10:00 AM Analysis Correlation of Full Scale Fatigue Tests with Multiple Load Spectra
Mr. David Johnson, Fatigue and Fracture Team, The Boeing Company
Slides

Diminishing Manufacturing Sources and Material Shortages (DMSMS) Knowledge Sharing Portal (DKSP)
Panel Moderator: David Robinson (Defense Logistics Agency)

8:00 AM - 10:00 AM Panel Overview:

• Update and status of the DOD sponsored "DMSMS Center of Excellence."
• Awareness of current DMSMS tools
• Knowledge on DMSMS management best practices
• Definition on DMSMS process
• Common indicators for problem categorization
• Issues to consider for DMSMS strategic planning

Chairpersons: Rick Russell (NASA), Dr. Rick Young (NASA)

8:00 AM - 8:30 AM A Probabilistic Fracture Mechanics Assessment of the Orbiter's LH2 Feedline Flowliner in Support of Return-to-Flight
Stephen Hudak, Jr., Luc Huyse, Graham Chell, Yi-der Lee, David Riha, Ben Thacker, Craig McClung and Brian Gardner, Southwest Research Institute
Paper

8:30 AM - 9:00 AM Nondestructive Methods Supporting Shuttle and ISS Composite Overwrapped Pressure Vessel Testing
Regor Saulsberry Project Manager,NASA
Slides MOV (43MB) MOV (121MB)

9:00 AM - 9:30 AM Overview of NASA White Sands Test Facility Composite Overwrapped Pressure Vessel Testing
Nathanael Greene and Regor Saulsberry, NASA-WSTF; John Thesken, OAI-GRC; Leigh Phoenix, Cornell University; Duane Revilock NASA-GRC
Slides

9:30 AM - 10:00 AM Space Shuttle Wing Leading Edge Impact Detection System (WLEIDS)
William H. Prosser, Eric I. Madaras, NASA Langley Research Center; George Studor, NASA Johnson Space Center; Michael R. Gorman and Steven M. Ziola, Digital Wave Corp. Slides AVI (688KB) MOV (804KB) MPG (1.2MB) AVI (2.9MB) MOV (712KB)

Chairpersons: Cesar Gomez (Federal Aviation Administration), Susan Rogers (Texas Instruments)

8:00 AM - 8:30 AM Arc Protection with Arc Fault Circuit Breakers (AFCB) Compared to Arc Protection with Standard (Bi-Metal) Circuit Breakers
Dominique Robert Meux and Dr. Thomas Stemmelen, Crouzet Automatismes, A Schneider Electric Company
Paper Slides WMV (3.8MB) WMV (4MB)

8:30 AM - 9:00 AM An Exploration of Arcing in 28VDC Electrical Systems
Charles Singer and Michael Allen, Naval Air Systems Command; Fred Potter, AMETEK Aerospace and Defense
Paper Slides MPG (1.7MB)

9:00 AM - 9:30 AM Determining Series Arcing in 115 Volt, 400 Hz, and 28 Vdc Systems
Michael Walz, Federal Aviation Administration William J. Hughes Technical Center; Charles Singer and Michael Allen, Naval Air Systems Command Electric Power Systems Division
Slides

9:30 AM - 10:00 AM Testing and Evaluation of Arc Fault Protection
Major Chris Lietch, Joseph Kuzniar, Michael Manders, Air Force Research Laboratory; Lt Kelson Chabak, United States Air Force 412th Flight Test Squadron
Paper Slides

Chairpersons: Rick Young (NASA), Barry Sturgis (Naval Air Systems Command)

10:30 AM - 11:00 AM Simulation of Multiple Site Damage Growth
David Steadman and Ramesh Ramakrishnan, Technical Operations Center, Delta Air Lines; Mark Boudreau, Aircraft Operation Division, FedEx Express
Paper Slides

11:00 AM - 11:30 AM Experimental and Analytical Evaluation of Lap Joint Multiple-Site Damage
Abubaker Ahmed and John Bakuckas, Federal Aviation Administration William J. Hughes Technical Center; J. Awerbuch, T. Tan and A. Lau, Drexel University, Department of Mechanical Engineering and Mechanics
Paper Slides

11:30 AM - 12:00 PM Characterization of Defects and Damage in Rivet Holes in a Crown Lap Joint of a Commercial Aircraft at Design Service Goal
Ramesh Ramakrishnan and Douglas Jury, Technical Operations Center, Delta Air Lines
Paper Slides

Chairpersons: Cu Nguyen (Federal Aviation Administration), Kevin Smith (Pratt & Whitney)

10:30 AM - 11:00 AM Fretting Fatigue of Laser Peened Ti-6Al-4V
David Lahrman, Allan H. Clauer, and David W. Sokol, LSP Technologies, Inc.; Levy Bernadel, Naval Air Systems Command; David See, Air Force Research Laboratory
Paper Slides

11:00 AM - 11:30 AM Large Area Instant Crack Detection and Identification Using Magnetic Carpet Probe
Yushi Sun and Tianhe Ouyang, Innovative Materials Testing Technologies, Inc.; Cu Nguyen, Federal Aviation Administration William J. Hughes Technical Center
Paper Slides

11:30 AM - 12:00 PM Engineered Residual Compressive Stress to Enhance Lifetime of Engines and Structures
Jim Harrison, Lloyd Hackel, Fritz Harris, Jon Rankin and Chanh Truong, Metal Improvement Company
Paper Slides

Chairpersons: Cliff Wolfe (DLA), John Thompson (DLA)

10:30 AM - 11:00 AM Process for Evaluating Logistics Readiness Levels (LRLs) for Acquisition Systems
Elizabeth Broadus, Booz Allen Hamilton, Inc.; Robert Ernst, Harry Proffitt and Andrew Yang, Naval Air Systems Command
Slides

11:00 AM - 11:30 AM A Statistical Model for Predicting Probable Future Performance
Frederick Rumph, United States Army, Aviation Engineering Directorate
Slides

11:30 AM - 12:00 PM A Not-So-Crystal Ball (The Unresolved Divergence Between Acquisition and Sustainment)
Hank Caruso, L-3 Titan Group Paper Slides

Chairpersons: Charles Singer (Naval Air Systems Command), James McCormick (Eaton Aerospace)

10:30 AM - 11:00 AM Wire Separation and Segregation Arc Damage Assessment
Michael Walz and Cesar Gomez, Federal Aviation Administration William J. Hughes Technical Center
Paper Slides

11:00 AM - 11:30 AM Reducing the Risk of Smoke and Fire in Transport Airplanes: Past History, Current Risk, and Recommended Mitigations John M. Cox, FRAeS, Safety Operating Systems
Paper Slides WMV1 (2.6MB) WMV2 (1.9MB) MPEG (48.3MB)

11:30 AM - 12:00 PM Evaluation of Risk and Possible Mitigation Schemes for Previously Unidentified Potential Hazards
William Linzey, Micah McCutchan and Michael Traskos, Lectromechanical Design Company; Richard Gilbrech, NASA Langley Research Center; Robert Cherney, Orbital Sciences Corporation; George Slenski, Wright Patterson Air Force Base; Walter Thomas III, NASA Goddard Spaceflight Center
Paper Slides WMV (996 KB)

Chairpersons: Allen Swanson (L-3 Communications), Kirit J. Bhansali (United States Army)

1:30 PM - 2:00 PM Role of Shot Peening Processes in Helicopter Component Qualification and Repair Randy McFarland, United States Army RDECOM
Paper Slides

2:00 PM - 2:30 PM Spectrum Coupon Testing of Load Transfer Joints Utilizing the ForceTec® Rivetless Nutplate System for an Aging Military Aircraft
Fraser McMaster, Amber Bonivtch and Peter McKeighan, Southwest Research Institute; Michael Blinn and Mark Thomsen, United States Air Force Hill AFB
Paper Slides

2:30 PM - 3:00 PM Fatigue Crack Growth In Integral Aluminum Structures
Jean-Christo Ehrstr–m, FrÈdÈric Bron and FranÁois LamaÓtre, ALCAN CRV; Sjoerd van der Veen, ALCAN AEROSPACE
Slides

Chairpersons: Thomas DeFiore (Federal Aviation Administration), James Locke (Wichita State University)

1:30 PM - 2:00 PM UDRI/FAA Operational Loads Monitoring Program
Daniel Tipps, University of Dayton Research Institute
Paper Slides

2:00 PM - 2:30 PM Training Aircraft Operational Loads Measurement Program
Michael Bradley, Acra Control Ltd.
Paper Slides

2:30 PM - 3:00 PM The Effects of Extreme Weather Environments/Severe Flight Loads Spectra on the Aging Fleet of NOAA's WP-3D Hurricane Hunter Aircraft
Chance McColl and Scott Bradfield, Technical Data Analysis, Inc.
Paper Slides

Chairpersons: Randy Davis (Naval Air Systems Command), Dr. Thomas Flournoy (Federal Aviation Administration)

1:30 PM - 2:00 PM Ageing Aircraft - The Quest for Knowledge
Richard Gauntlett and Bob Holdsworth, Boeing Australia Limited
Paper Slides

2:00 PM - 2:30 PM General Series Technical Data Initiatives
Matt Waters and Elizabeth Crocket, Naval Air Systems Command (NATEC)
Slides

2:30 PM - 3:00 PM Job Performance Aids (JPAs)
Matt Waters and Elizabeth Broadus, Naval Air Systems Command
Slides

Chairpersons: Michael Walz (Federal Aviation Administration), Jim Cockrell (NASA)

1:30 PM - 2:00 PM Detection of Intermittent Faults in Aircraft Electrical Wire by Utilizing Power Line Communication
Charles Kim and Nicholas Johnson, Howard University Paper Slides

2:00 PM - 2:30 PM Embedded Sensor to Assist Proper Installation of Electrical Wire Harness Clamps and to Monitor Degradation of Wires
Ajay Siddoju, Chaitanya Gogineni, Sandeep Bajjuri, University of Dayton; Shamachary Sathish, Center for Materials Diagnostics, UDRI
Paper Slides

2:30 PM - 3:00 PM Electrical Signature Analysis for Electro-Mechanical Components
Daryl Cox, James Hansen, Howard Haynes, Oak Ridge National Laboratory; Robert Andrews, Structural Integrity Division, UDRI
Slides

Chairpersons: Dy Le (Federal Aviation Administration), William Prosser (NASA)

3:30 PM - 4:00 PM Rapid Distributed Data Collection And Processing With Arrays ­ The Next Step Beyond Full Waveform Capture
David I. A. Lines, Diagnostic Sonar Ltd., UK; Irene G Pettigrew, Katherine J Kirk, and Sandy Cochran, Microscale Sensors, University of Paisley, UK; Jesse A Skramstad, NDT Solutions Inc, USA
Paper Slides

4:00 PM - 4:30 PM Fleet Usage Monitoring is Essential in Improving Aging United States Army Helicopter Safety, Availability, and Affordability
Robert Vaughan, Army; David White, Avion, Inc.
Paper Slides

4:30 PM - 5:00 PM The Effects of Degraded Data on the Performance of Health Usage Monitoring Systems (HUMS) in Rotary Wing Aircraft
Subhasis Sarkar, and Gene Barndt, Technical Data Analysis, Inc.; Scott Maley, Naval Air Systems Command
Paper Slides

5:00 PM - 5:30 PM Health Monitoring of Aircraft Structures Using Distributed Sensor Systems
Dennis Roach and Kirk Rackow, Sandia National Labs
Paper Slides

Application of Safety Critical Items (CSI) to Aging Aircraft
Panel Moderator: Allen Swanson (L-3 Communications)

3:30 PM - 5:30 PM Panel Overview: Critical Safety Items (CSI's) are specific items that will result in an accident/injury if they occur. Items that are identified must be addressed/eliminated, regardless of the probability of occurrence. The DoD is presently implementing CSI policy and will likely impact significantly DoD operations and related industry counterparts. The panel will focus upon various interpretations of CSI policy and the application to aging aircraft.
Panel Members: Jeff Allen, Naval Air Systems Command; Gary VanOss, United States Air Force/WPAFB; James Phillips, Lockheed Martin Aerospace
Slides Slides

Chairpersons: Robert McGuire (Federal Aviation Administration), Robert Jones (Federal Aviation Administration)

3:30 PM - 4:00 PM The Development and Application of an Aging Mechanical Systems Methodology for Commercial Aircraft Systems
Bob McGuire and Robert Jones, Federal Aviation Administration; Tracy Fry and Dan Bowman , University of Dayton Research Institute
Paper Slides

4:00 PM - 4:30 PM Evaluation of Aged Boeing 737 and 747 Single Element Dual Load Path (SE-DLP) Flight Control Components
Robert Vaughan, United States Army; Joseph DiMambro, Paul Werner and Isaac Montano, Sandia National Laboratories
Paper Slides

4:30 PM - 5:00 PM Sandia Report on Flight Control Systems Evaluation - FAA Aging Mechanical Systems Program
Ann Chang, Joseph DiMambro and Paul Werner, Sandia National Laboratories
Slides

5:00 PM - 5:30 PM Material Aging on EA-6B Flaperon Actuators
Michael Haselkorn, Rochester Institute of Technology
Slides

Chairpersons: Sean Field (Naval Air Systems Command), Clay Satterlee (United Airlines)

3:30 PM - 4:00 PM Hilbert Huang Transform for Single Wire Diagnostics
Michael Walz, Federal Aviation Administration William J. Hughes Technical Center; Norden E. Huang, NASA Goddard Space Flight Center; Mokhtar Sadok, Goodrich Corporation
Paper Slides

4:00 PM - 4:30 PM Radical Extension of Time Domain Reflectometry for Detection and Location of Flaws in (Aircraft) Wiring Systems
Eric van Doorn and Devendra Tolani, Intelligent Automation, Inc.
Paper Slides

4:30 PM - 5:00 PM New Developments in the Practical Application of Low-Energy High-Voltage Wire Diagnostic Techniques
Steven Eisenhart and Michael Ballas, Astronics AES
Paper Slides

5:00 PM - 5:30 PM Ultrasonics Equipped Crimp Tool - A New Technology for Aircraft Wiring Safety
William Yost, Daniel Perey and Elliott Cramer, NASA Langley Research Center
Slides

Chairpersons: Walt Tomczykowski (ARINC), John Thompson (DLA)

3:30 PM - 4:00 PM DMSMS Interoperability for Aging Aircraft
Malcolm Baca, QinetiQ Technology Extension Corporation (QTEC)
Paper Slides

4:00 PM - 4:30 PM The World's Ultimate Aftermarket Solution
Jack Stradley, Rochester Electronics
Slides

4:30 PM - 5:00 PM Beyond Proactive DMSMS, What's Next: Coordinated Technology Management
Matthew Milas, Altarum Institute; Ray VanderBok, Altarum Institute
Paper Slides

5:00 PM - 5:30 PM V-22 Obsolescence Verification and Analysis Process
Robin Brown, Naval Air Systems Command Aging Aircraft IPT Wyle Systems
Paper Slides

Chairpersons: Scott Fawaz (United States Air Force), Robert Eastin (Federal Aviation Administration)

8:00 AM - 8:30 AM Probabilistic Approach to Fleet Risk Management of Small Airplanes
Marvin Nuss, Federal Aviation Administration Small Airplane Directorate; Michael Shiao, Federal Aviation Administration William J. Hughes Technical Center
Paper Slides

8:30 AM - 9:00 AM Feature Detection as a Means of Importance Sampling for Multiple Site Damage Monte Carlo Simulations
Peter Horst, Institute of Aircraft Design and Lightweight Structures, TU Braunschweig
Paper Slides

9:00 AM - 9:30 AM Probability Basis of Fatigue Evaluations in Small Airplanes
W. Michael Reyer, Federal Aviation Administration Small Airplane Directorate
Paper Slides

9:30 AM - 10:00 AM Non-periodic Inspections of Aging Aircraft Structures
Andreas Rambalakos, Dassault Falcon Jet Corp.; George Deodatis, Dept. of Civil Engineering & Engineering Mechanics, Columbia University
Paper Slides

Chairpersons: Alfred Broz (Federal Aviation Administration), Jeremy Knopp (United States Air Force)

8:00 AM - 8:30 AM Analytical Issues in Determining Probability of Detection (POD)
Michel Bode and Floyd Spencer, Sandia National Laboratories; David Piotrowski, Delta Air Lines.
Paper Slides

8:30 AM - 9:00 AM Reliability Validation of Automated Ultrasonic Scanning for Detection of Fatigue Cracks at Fastener Holes
Geoff Hugo, Cayt Harding and Sue Bowles, Defence Science and Technology Organisation
Paper Slides

9:00 AM - 9:30 AM Use of Physics-Based Models of Inspection Processes to Assist in Determining Probability of Detection
R. Bruce Thompson, Iowa State University
Paper Slides

9:30 AM - 10:00 AM Specifying Nondestructive Testing Thresholds in Service
David Forsyth, TRI/Austin
Paper Slides

Chairpersons: Steve Carr (United States Army), Kevin Kovoleski (Naval Air Systems Command)

8:00 AM - 8:30 AM Corrosion Suspension: Dehumidification of US Coast Guard Operational Aircraft
Samuel Benavides and Ronald Holland, United States Coast Guard
Paper Slides

8:30 AM - 9:00 AM Improved Multi-Purpose Grease Study Airframe Bearings Fleet Focus Team
Christopher Medic, Naval Air Systems Command
Slides

9:00 AM - 9:30 AM Effects of Corrosion Inhibiting Lubricants on Electronics Reliability Scott Dotson, United States Air Force, 542nd CSW/ESG Warner Robins AFB
Paper Slides

9:30 AM - 10:00 AM An Experimental Study Of The Effects Of Wash-Rinse Intervals On Corrosion
William Abbott, Battelle; Richard Kinzie, United States Air Force Corrosion Program Office
Slides

Chairpersons: Jerome Collins (Naval Air Systems Command), Fred Potter (AMETEK)

8:00 AM - 8:30 AM Wiring Harness Integrity Program for CF-18 Aircraft
Marco Césaré, L-3 Communications MAS Canada Avionics and System; Lt Michael Clement, Department of National Defence (DND) DGAEPM/DAEPM
Slides AVI, 2.5MB

8:30 AM - 9:00 AM Joint Service Aircraft General Wiring Maintenance
Oliviu Muja, Naval Air Systems Command Aging Aircraft IPT
Slides

9:00 AM - 9:30 AM Analysis of Test Data to Identify Wiring Failure Causes and Trends on US Coast Guard Rotary Aircraft
Keith Stevenson, United States Coast Guard; Mike Bequette, DIT-MCO International
Paper Slides

9:30 AM - 10:00 AM Applying Performance Support Technology to Electrical Wiring Interconnect System Training and Maintenance: Results of the E-2C Avionics Case Study Roger LaPlante and Anna Liisa Van Mantgem, REI Systems, Inc. MaintenanceMax Group
Paper Slides

Chairpersons: Scott Forth (NASA), Richard Rice (Battelle)

10:30 AM - 11:00 AM FASTRAN Analyses of Coupons with Residual Stresses Due to Overloads and Cold-worked Holes
James Newman, Steve Daniewicz and Jim LaRue, Department of Aerospace Engineering, Mississippi State University; Dy Le, Federal Aviation Administration William J. Hughes Technical Center
Paper Slides

11:00 AM - 11:30 AM Analysis of the Effects of Riveting Process Parameters on Fatigue of Aircraft Fuselage Lap-Joints
Amarendra Atre and William Johnson, Georgia Institute of Technology
Paper Slides

11:30 AM - 12:00 PM Probabilistic Crack Growth Analysis
Andrew Makeev, Richard Cross, Yuri Nikishkov and Erian Armanios, Georgia Institute of Technology
Paper Slides

Chairpersons: Elliott Cramer (NASA LaRC), Paul Swindell (Federal Aviation Administration)

10:30 AM - 11:00 AM Progress Towards a Large-area Transient Eddy Current Solution for Second-layer Wing Corrosion
Robert A. Smith and David Edgar, QinetiQ Ltd, UK; Jesse Skramstad, NDT Solutions Inc.; Nancy Wood, The Boeing Company
Paper Slides

11:00 AM - 11:30 AM Scanning and Permanently Mounted Sensor Arrays for Corrosion Imaging and Monitoring
Neil Goldfine, Vladimir Zilberstein, David Grundy, Ian Lorilla, Darrell Schlicker, JENTEK Sensors, Inc
Slides

11:30 AM - 12:00 PM NDI System for Detection of Corrosion in H53 External Fuel Tank Liners
John Doane, Jayme Caspall, Michael Gray, Ralph Herkert, Gary O'Neill, Georgia Tech Research Institute Research Institute; Yves Berthelot, Ghislain Retaureau, School of Mechanical Engineering, Georgia Institute of Technology
Slides

Chairpersons: David Rumpf (NASA), Catherine Kammerer (United Space Alliance)

10:30 AM - 11:00 AM Space Shuttle Orbiter Corrosion History
Kurt Batson and Julia Hess, The Boeing Company
Paper Slides

11:00 AM - 11:30 AM Space Shuttle Orbiter Corrosion Database
Marcella Solomon, Boeing
Slides

11:30 AM - 12:00 PM Space Shuttle Corrosion Control Program
Cris Curtis, United Space Alliance
Paper Slides

Chairpersons: Michael Ballas (Astronics AES), Mike Sterling (NASA)

10:30 AM - 11:00 AM Stationarity Index Theory for Single Wire Diagnostics
Mokhtar Sadok, Goodrich Corporation; Mériem Jaidane, Ecole Nationale d'Ingenieurs de Tunis (ENIT), Depa; Michael Walz, Federal Aviation Administration William J. Hughes Technical Center
Paper Slides

11:00 AM - 11:30 AM On-Aircraft Wiring Characterization and Validation of Handheld Diagnostic Equipment
Steven Gerken, United States Air Force; Dale Hart, University of Dayton Research Institute (UDRI); Daniel Adducchio, AT&T Government Solutions; John Bouchard, Consultant, Northrop Grumman Information Technology
Paper Slides

11:30 AM - 12:00 PM Risk of Igniting Aviation Fuel Vapors When Utilizing Low-Energy High-Voltage Techniques to Identify and Locate Defects in Electrical Wiring Interconnect Systems
Steven Eisenhart and Michael Ballas, Astronics AES
Paper Slides

Chairpersons: Dr. John Bakuckas (Federal Aviation Administration), Dr. James Newman (Mississippi State University)

1:30 PM - 2:00 PM Stress Intensity Factors for Non-Symmetric Cracks at Countersunk Fastener Holes
Alten Grandt and Jungjun Suh, School of Aeronautics and Astronautics, Purdue University
Paper Slides

2:00 PM - 2:30 PM Enhanced Crack Growth Methodology and Analyses for Unitized Structures
Kenneth Chan, The Boeing Company; James Harter, United States Air Force, AFRL/VASM; Alten Grandt, Purdue University; Kyle Honeycutt, Analytical Processes/Engineered Solutions Inc.
Slides AVI (6.4MB)

2:30 PM - 3:00 PM Slant Fracture in Ductile Materials: Investigation and Prediction
Michael A. Sutton, Xiaomin Deng and Weiming Lan, University of South Carolina; Ching-Shan Cheng, GM R&D and Planning, Vehicle Development Research
Paper Slides AVI (2.3MB) AVI (2.2MB) AVI (2.2MB) WMV (1.2MB) WMV (9.4MB)

Chairpersons: Charles Buynak (United States Air Force), Bill Miller (Transport Canada)

1:30 PM - 2:00 PM Phased-Array Ultrasonics as an Approved Method for the Inspection of 737 Fuselage Skin Scribe Line Cracks
Andre Lamarre, Aerospace Marketing Olympus NDT Canada; Jeffrey Kollgaard, The Boeing Company
Slides

2:00 PM - 2:30 PM Aging Aircraft Rivet Inspection Using Magneto-optic Imaging: Automation and Real-time Image Processing
Yuan Fan, Yiming Deng, Zhiwei Zeng and Lalita Udpa, Michigan State University; William Shih and Gerald Fitzpatrick, PRI Research and Development Corporation
Paper Slides AVI (1.9MB) AVI (4.4MB)

2:30 PM - 3:00 PM Remote Field Eddy Current Military and Commercial Platform Applications
Yushi Sun, IMTT; John Brausch, Kenneth LaCivita and William Sanders, AFRL; Greg Linkert, NWA
Paper Slides

Chairpersons: Walt Tomczykowski (ARINC), Lynne Marinello (United States Army)

1:30 PM - 2:00 PM Successful Solutions to the Parts Obsolescence Problem
Robert Polanowski, United States Navy
Slides AVI (18.7MB)

2:00 PM - 2:30 PM Lead-free Solder & Tin Whiskers - Situation Summary
David Kayser, Reliability & Maintainability Engineering, AIR-4.9.47
Slides

2:30 PM - 3:00 PM Process Technologies for Replacement Parts Production
Scott Hofacker, United States Army; Andrew Peddie, Alion Science & Technology
Paper Slides

3:00 PM - 3:30 PM- Class Change Initiative
Ron Marafioti, Cliff Wolfe, DLA
Slides

Chairpersons: Joseph Kuzniar (United States Air Force), Tom Harris (The Boeing Company)

1:30 PM - 2:00 PM Novel Technologies for Improving Wire System Integrity
George Slenski and Paul McDowell, Air Force Research Laboratory; Mike Walz, Federal Aviation Administration William J. Hughes Technical Center
Paper Slides

2:00 PM - 2:30 PM Retrofitting Solid State Power Distribution into Existing Aircraft
Fred Potter and Donald Furmanski, AMETEK, Power & Data Systems
Paper Slides MPG (1.7MB)

2:30 PM - 3:00 PM Developments In EWIS And Laser Wire Marking and Stripping Technology in Relation to the Aerospace Regulatory and Standards Framework
Peter Dickinson, Spectrum Technologies PLC
Paper Slides

Chairpersons: Curtis Davies (Federal Aviation Administration), Larry Coulter (United States Air Force)

3:30 PM - 4:00 PM Testing and Analysis for Safe Performance of Composite Substrate in H-60 Rotor Blades after Paint Removal by Photostripping
Bhavya Aggarwal, Shantanu Prabhune, Ramesh Talreja, John Whitcomb, Department of Aerospace Engineering Texas A&M University
Slides

4:00 PM - 4:30 PM Aging Effects Evaluation of a Decomissioned Boeing Composite 737-200 Horizontal Stabilizer (Phase Ii)
Lamia Salah and John Tomblin, National Institute for Aviation Research; Curtis Davies, Federal Aviation Administration William J. Hughes Technical Center
Paper Slides

4:30 PM - 5:00 PM Effect of Nodebond Failures on Structural Integrity of F/A 18 Trailing Edge Flaps
Anisur Rahman, Naval Air Systems Command
Paper Slides

5:00 PM - 5:30 PM Effect of Elevated Temperature and Moisture on the Fatigue Delamination Behavior of the Fibre Metal Laminate Glare
René Alderliesten, Delft University of Technology
Paper Slides

Panel Discussion: Open Systems Avionics Design
Moderator: David Lund, Director (Aerospace Vehicle Systems Institute) (AVSI)

3:30 PM - 5:30 PM Panel Overview: Aging Avionics area major contributor to the cost of maintaining commercial and military fleets. Methods to mitigate the effects of DMSMS and accelerate the current slow and costly acquisition of new systems need to be developed to ensure that legacy aircraft continue to be safe and effective and that future aircraft do not repeat the same mistakes. Many feel that use of "Open Systems" in avionics design and procurement will meet this need. Regardless of the standards selected, an effective, cooperative relationship among government, commercial operators, and the avionics suppliers and integrators continues to be forged. DoD has several "Open System" efforts underway. Several approaches to achieving longterm viability; Viable Combat Avionics, and Modular Open Systems Approach Interoperability Initiative (MOSA II) are being pursued. Industry efforts also add to an overall approach to open systems. The Open Systems Joint Task Force (OSJTF) has provided overall guidance. Success of these initiatives will depend on the combined efforts of the DoD/industry leaders.
Panel Members: Andrew Yang, Tuan Nguyen, Mark Milton, United States Navy; Glen Logan, American Systems Corporation; Will Urschel, United States Air Force; Fred Kuhn, The Boeing Company; Ben Watson, Lockheed Martin Aeronautics; Glenn (Mike) Dunham, Rockwell Collins; Joseph (Joe) Bergmann, The Open Group
Slides Slides Slides Slides Slides Slides

Chairpersons: Ann Azevedo (Federal Aviation Administration), David Steadman (Delta Air Lines)

3:30 PM - 4:00 PM Understanding Our Aging Aircraft Fleets: Deriving Aging Aircraft Requirements from AF Maintenance Metrics and Data
Karl Hart, Alion Science & Technology
Paper Slides

4:00 PM - 4:30 PM Aircraft Engine Relibility-Centered Maintenance
Tammy Jetton, Joseph Ritzel, Thomas Vaden and Randy Story, Air Force Audit Agency Acquistion and Logistics
Slides XLS XLS XLS XLS XLS XLS

4:30 PM - 5:00 PM A Methodology to Allocate Resources to Sustain Aging Aircraft and Systems
Greg Olson, Wyle Laboratories; Lance Hernandez, Naval Air Systems Command, Aging Aircraft IPT
Slides

5:00 PM - 5:30 PM Mimosa - A Solution for the Transfer of Data from Disparate Systems
Carl Powe, SAIC
Paper Slides

Chairpersons: Steve Gerken (United States Air Force), Jean-Luc Ballenghien (Airbus)

3:30 PM - 4:00 PM Development of Self-Repairing Wire
Robert Kauffman, University of Dayton Research Institute
Paper Slides

4:00 PM - 4:30 PM Development of High Temperature Wiring for Hotter Section of Turbine Engine
Amarendra Rai and V. Nagarajan, UES Incorporated.; Chi Nguyen and Kailash Mehta, Astro Industries; Gary Smith, Air Force Research Lab, WPAFB; Roy McMahon, Raytheon
Paper Slides

4:30 PM - 5:00 PM Development of Conductive, Rigid-Rod Polymer Wires
Donald Klosterman and Weidong Liu, University of Dayton Research Institute (UDRI)
Slides

5:00 PM - 5:30 PM Polyimide Insulation Repair And Degradation Prevention Techniques
Raj Makote, University of Dayton Research Institute (UDRI)
Paper Slides

Chairpersons: Dr. William Winfree (NASA - LaRC), Dr. Srinivasan Raghuraman (United States Army)

8:00 AM - 8:30 AM Recent Developments in IR Imaging with Chaotic Sound Excitation for NDI of Metallic and Composite Aircraft Structures
Xiaoyan Han, Sarwar Islam, L.D. Favro, G.M. Newaz, and R.L. Thomas, Wayne State University
Paper Slides AVI (85.5 MB) AVI (21.9 MB) AVI (63.5MB)

8:30 AM - 9:00 AM Hot-spot Fatigue Crack Monitoring of Inaccessible Structural Regions in Aircraft Subsystems Using Structural Health Monitoring
Roy Ikegami, Shawn Beard, Amrita Kumar, Peter Qing, Robert Hannum, Acellent Technologies, Inc.
Paper Slides

9:00 AM - 9:30 AM Assessment of Capabilities and Readiness of Conventional and Emerging NDI Methods for Subsurface Cracks in Lap-joint structure
David Piotrowski and John Bohler, Delta Air Lines; Mike Bode and David Moore, Sandia National Labs
Paper Slides

9:30 AM - 10:00 AM Phased-array Ultrasonics as an Approved Method for the Inspection of DC-9 Landing Gear and 737 Fuselage Skin Scribe Marks
>Andre Lamarre and Philippe Cyr, Olympus NDT Canada; Masood A. Zaidi, Boeing; Jeff Register and Mike Fortman, Northwest Airlines
Slides

Panel Discussion: Congressionally Directed Corrosion Czar - What Is It and Why Is It Important?
Panel Moderator: Dave Erickson, Deputy Director, OSD CPC Executive Office

8:00 AM - 10:00 AM Panel Overview: Because of the variety of actions being taken by many government agencies addressing corrosion prevention control (CPC), Congress saw this duplication of effort as wasteful and inefficient. By designating a "Czar", Congress desires to focus resources and people on an organized and integrated CPC approach. This panel will address the overall approach to this multi-faceted effort, discuss status and future plans, present and solicit technology opportunities, and involve the audience in discussions regarding the CPC directions being taken on behalf of government agencies. Attendees of the panel will receive a broad overview of the many efforts being undertaken to cover the full waterfront of problems being addressed by the CPC Czar and receive insight